...

Roof 360 – Roofing Virtual Inspections (BETA)

Please enable JavaScript in your browser to complete this form.
Step 1: Project InformationStep 1 of 2
Address
Project Location
Please type in the Permit Number for the job. This is displayed on the permit card or JobNimbus.
Roof Type

Sheathing

Sheathing Thickness
Select Sheathing Thickness. [R803.2.2]. If “Other” please include that information in the “Additional Comments” Section.
Sheathing Fastening
[R803.2.3.1] Where the sheathing thickness is 15/32 inches and less, sheathing shall be fastened with ASTM F1667 RSRS-01 (23/8″ × 0.113″) nails. Where the sheathing thickness is greater than 15/32 inches, sheathing shall be fastened with ASTM F1667 RSRS-03 (21/2″ × 0.131″) nails or ASTM F1667 RSRS-04 (3″ × 0.120″) nails. RSRS-01, RSRS-03 and RSRS-04 are ring shank nails meeting the specifications in ASTM F1667. If “Other” please include that information in the “Additional Comments” Section.

Underlayment

Underlayment Product
[R905.1.1 Underlayment] If “Other” please include that information in the “Additional Comments” Section.
Nailing Spacing
[R905.1.1.1] If “Other” please include that information in the “Additional Comments” Section.
Nail Type

Asphalt Shingle Product

Nailing Requirements
Installation of asphalt shingles shall comply with the current published instructions, using minimum four (4) nails per shingle in accordance with FBC 1507.2.7 or R905.2.6. If “Other” please include that information in the “Additional Comments” Section.
Nail Type
Roof Accessories