Skip to content 
Roof C&C Pressures Calculator
Accurate Wind Calculation Tools for Professionals
Ensure structural integrity and code compliance with reliable preliminary wind load data from WindCalculations.com. Developed according to ASCE 7-22 principles, our online calculators provide essential estimations for engineers, architects, and builders working on projects across the US, with special consideration for demanding environments like Florida. From component pressures to overall structural loads, access the calculations you need to inform your design decisions.
⚠️ Preliminary Tool: Enter your parameters below for an estimation only. Results use simplified assumptions and are NOT a substitute for professional engineering design. Please read the full disclaimer below.
ASCE 7-22 Roof C&C Wind Pressure Calculator
(Uses Simplified Assumptions GCp Values)
How to Use
Enter wind and geometry data below. Click \”Calculate\” for estimated pressures per zone.
Inputs
Results
Load: –
Load: –
Load: –
Load: –
Load: –
Load: –
Disclaimer: This calculator provides conceptual estimations based on ASCE 7-22 principles but uses **highly simplified, estimated coefficients (`GCp`)** that do not fully represent the complexity of the standard’s figures. Results may significantly differ from actual design requirements. This tool is **NOT a substitute for professional engineering design**. Wind load calculations are critical for safety and code compliance. Always engage a licensed professional engineer familiar with ASCE 7-22 and applicable local building codes (e.g., Florida Building Code) for any design or construction project. Use of this tool is at your own risk. The creators assume no liability for decisions made based on these estimations.
IMPORTANT LIMITATIONS & DISCLAIMERS (PLEASE READ):
Effective Wind Area: The effect of Effective Wind Area on GCp values (especially for negative pressures) is complex and only minimally represented in these assumed values.
GCp Values are SIMPLIFIED ESTIMATES: Calculating the actual External Pressure Coefficients (GCp) from ASCE 7-22 figures (like 30.3-2 to 30.3-7) is extremely complex. It depends heavily on exact roof slope, mean roof height, effective wind area, and specific roof zone geometry (which differs for gable vs. hip roofs). This code uses simplified, representative estimated values for demonstration purposes (roughly based on a common gable roof case, slope 7-27°, h<=60ft). These assumed values are NOT accurate for all situations and MUST NOT be used for actual design.
Professional Engineer Required: This tool provides conceptual estimates ONLY. Wind load design is complex and critical for safety. Always consult a qualified, licensed professional engineer for actual design calculations specific to your project and location. They will use the full ASCE 7-22 standard or applicable local codes (like the Florida Building Code).
Assumptions: This calculator assumes Kd = 0.85 (standard directionality factor) and typically Kzt = 1.0 (no significant hills/escarpments, though input is provided). It uses a more detailed Kh calculation based on ASCE 7-22 Table 26.10-1.
